HCL Activator 140 ml

5.00 out of 5
(1 customer review)
13,95 Tax included

Regístrate para conocer el tiempo de envío.

Más de 60.000 clientes contentos

Secure payment via SSL

Free shipping from € 50

We are authorized manufacturers

Metodos Pago

* Price including taxes, for more information click here

Ficha de datos de seguridad

Activador HCL


Activator for obtaining in situ a biocide (Chlorine dioxide). 4% hydrochloric acid aqueous solution, necessary to activate sodium chlorite. Biocide included in Art. 95 of the BPR regulation, exclusively used for the disinfection of water for human or animal consumption.


Hydrochloric Acid Solution 4%. Hydrochloric Acid HCl Activator Container (4%).


For the disinfection of drinking water:

One drop of HCl Activator is used for each drop of Sodium Chlorite (1:1). Dosage 2 drops of Sodium Chlorite and 2 drops of Activator for each liter of water to be treated, in a dry container (non-metallic) regardless of the number of activated drops. Wait about 5 seconds until a golden amber colour is obtained. The mixture must then be diluted in water. Add water (>150 ml) to stabilise the activated solution as soon as possible.

The intense yellow colour indicates the degree of saturation of the CIO2 gas which evaporates over time. This yellowish solution must be diluted in the water to be treated as soon as possible in order to ensure maximum efficiency and allow it to act for at least 30 minutes.

Do not drink the treated water until the active chlorine level drops below 1.5 ppm. If when measuring the level of chlorine, it is unnoticeable, repeat the operation until the level of active chlorine in the water is between 0.5-1.5 ppm. The quantity of product to be dosed and the time of exposure will always depend on the quality of the water to be treated. Use with caution, always read the labels and information about the product. Store in a cool, dry place in an upright position.

Do not expose to sunlight to avoid degradation. It is not necessary to keep the containers in the refrigerator at reasonable temperatures when the ambient temperature is below 22-24º C.

For surface and tool disinfection in Food Industries and other areas of private life and public health:

Mix in equal parts, in a clean and dry glass (not metallic), 25 ml of Sodium Chlorite Solution NaClO2 (25%) and 25 ml of Activator HCl (4%), wait about 45-60 sec. until a golden amber color is obtained, and dilute the mixture in 5-10L in water, according to the level of dirt, in a closed container.
In a ventilated place, apply this dilution on the surfaces by means of a cloth or mocho, or by immersion of the tool. Leave to act for at least 5 minutes and then rinse with plenty of water before use.


The package contains 140 ml of 4% muriatic acid. Gentle concentration. Sodium chlorite should never be used alone. It should always be activated with a safe acid like 4% HCL. 140 ml opaque container, to preserve all its quality and its optimal conservation. It is very important to bear in mind that exposing the contents to ultraviolet light deteriorates the product.

1 review for HCL Activator 140 ml

5.00 out of 5
Based on 1 review
5 star
4 star
3 star
2 star
1 star
  1. 5 out of 5

    Tibor M.

    Clean, great product! Thank you.

    Was this review helpful to you?
Add a review


  • No products in the cart.